GSE LIGHT CONTROLLER (2 CHANNEL) V1.60

Product detailed description

This light controller with a 2x16 character display covers all basic needs. It has a keypad with 4 buttons: UP, DOWN, ENTER, and Save/Exit.
Functions include:
Time-based start/stop, dimming based on ambient temperature, minimum and maximum dimming ranges, emergency stop when the room heats up with temperature recovery, and a restart delay to prevent HPS and MH lamps from turning on when the bulb is hot. Sunrise and sunset functions are also included. In the secondary settings, you can choose the LCD backlight behavior, set the current time in 24-hour format, select a fixed 0-10V or PWM (pulse-width modulation) output signal, switch between °C and °F, and choose languages. The lighting controller has two individual channels for two separate rooms.
The device comes with a 4m long temperature control cable for one channel. An adapter allows you to split the output signal to multiple connectors, including a terminal block and RJ11. Screws and wall plugs for wall mounting.
Features:
Time, Date,
Day Counter,
Temperature Dimming,
Dimming Range Settings,
Temperature Off
, Reset
Delay, Sunrise/Sunset
, 0-10V or PWM
Signal, Temperature Compensation (Calibration),
Temperature °C or °F,
Backlight Adjustment,
Language Settings: English, Spanish, Italian, German, and French.

Is a power supply required?
If the LED driver/ballast provides a 2-wire GND signal, then yes.
If the LED driver/ballast provides a 3-wire GND-VDC >10V signal, a power supply is not required.
The ballast/LED cable that connects with an RJ45 connector on the driver side is not included. This is usually supplied with the lamp or can be purchased separately at any electronics or computer store.